Poolheat Pumps

Waterco
HEAT PUMPS

  • favicon
    Waterco
  • water, the liquid of life.

Waterco pioneers reliable solutions for healthy, safe water environments, which are used in residential, commercial and industrial applications in over 40 countries. Established in 1981 in Sydney, Australia, it has since become a global brand recognised for designing and manufacturing filtration and sanitisation innovations for the swimming pool, spa, aquaculture, and water purification sectors. 

  • favicon
    WATERCO Heat Pump Ranges

Electroheat MKV

Waterco Ltd has re-designed its popular side vented Electroheat MKV heat pump, which is not only sporting a new pewter colour but a special evaporator coating that ensures high heat transfer and corrosion resistance for pool and spa owners living in humid or coastal environments.

Compared to gas and electric heaters, the Electroheat MKV pool heat pump range use just a fraction of the energy to generate the same amount of heat and unlike solar heating; there is no reliance on the sun as the latent heat in the air is used.

A grey Waterco heat pump with a circular fan in front, and a red digital display in the right corner.
  • Energy efficiency: Pool heat pumps are more energy-efficient than other types of pool heaters, such as gas or electric heaters. This is because they use electricity to move heat, rather than generating it.
  • Cost-effectiveness: Pool heat pumps can save you money on your energy bills, especially if you live in a mild climate.
  • Extended swimming season: Pool heat pumps can extend your swimming season by warming the pool water in the cooler months.
  • Environmental friendliness: Pool heat pumps are an environmentally friendly way to heat your swimming pool. They do not produce any emissions and they use less energy than other types of pool heaters.
  • Energy efficient: Uses 1kW to produce up to 6kW of heat.
  • Unique modern robust design: Noise and vibration reduction
  • Hydrophilic Blue fin evaporator technology: Improves corrosion resistance.
  • Dual coil heat exchange: Increases heat pump’s performance.
  • Improved condensate collection: Two fitted spigots allow drainage hose connection
  • Refrigerant pressure gauge: Indicate the level of gas charge

A grey Waterco heat pump with a circular fan in front, and a red digital display in the right corner.

Electroheat Plus

Armed with vertical venting and a large evaporator area for maximum performance, the Electroheat Plus is a thermal powerhouse. Designed for year-round enjoyment, is perfect where roof space for solar is limited. Using a fraction of energy, the Electroheat Plus uses latent heat in the air to warm your swimming pool. 

A Waterco Electro Heat Plus heat pump, square and grey in shape and color.
  • Energy efficiency: Pool heat pumps are more energy-efficient than other types of pool heaters, such as gas or electric heaters. This is because they use electricity to move heat, rather than generating it.
  • Cost-effectiveness: Pool heat pumps can save you money on your energy bills, especially if you live in a mild climate.
  • Extended swimming season: Pool heat pumps can extend your swimming season by warming the pool water in the cooler months.
  • Environmental friendliness: Pool heat pumps are an environmentally friendly way to heat your swimming pool. They do not produce any emissions and they use less energy than other types of pool heaters.
  • Energy efficiency: uses 1kW to produce up to 5kW of heat.
  • Unique modern robust design: Noise and vibration reduction
  • Hydrophilic Blue fin evaporator technology: Improves corrosion resistance
  • Dual coil heat exchange: Increases heat pump’s performance
  • Ozone friendly R410A refrigerant

Electroheat ECO-V Top Vent Inverter

The new Electroheat ECO-V inverter technology top vent pool heat pump range in 12 , 21, 24, 27, 39 in single phase models and, 38 & 48kW capacities in three phase models rated at 27C air feature a sophisticated and advanced outer shell design in Waterco’s signature pewter colour and have heating and cooling capabilities.

  • Energy efficiency: Electroheat ECO-V inverter pool heat pumps utilise a variable speed compressor to regulate the pool water temperature automatically and independently.
  • Cost-effectiveness: Pool heat pumps can save you money on your energy bills, especially if you live in a mild climate.
  • Extended swimming season: Pool heat pumps can extend your swimming season by warming the pool water in the cooler months.
  • Environmental friendliness: Pool heat pumps are an environmentally friendly way to heat your swimming pool. They do not produce any emissions and they use less energy than other types of pool heaters.
  • Automatic Evaporator DE-ICING: Electroheat ECO-V inverter pool heat pumps feature automatic de-icing for situations where frost or ice may develop on the evaporator as part of normal operation. Common in cooler climates or winter months.
  • Inverter technology improves energy efficiency.
  • Top venting design allows for greater installation options.
  • Digital controller with diagnostics.
  • Heating and cooling operating modes to select from.
  • Hydrophilic blue fin coated evaporator: protects unit from erosion in humid and coastal environments
  • Automatic hot gas evaporator de-icing removes ice build up
  • R32 refrigerant for zero ozone depletion (21 – 48kW models)
  • R410A refrigerant (12kW model)

Electroheat ECO-V Inverter Side Venting

The new Electroheat ECO-V inverter technology side venting pool heat pump range in 7, 12, 15, 20 & 27kW capacities feature a sophisticated and advanced outer shell design in Waterco’s signature pewter colour and have heating and cooling capabilities.

A grey Waterco heat pump with a circular fan in front, and a red digital display in the right corner.
  • Energy efficiency: Electroheat ECO-V inverter pool heat pumps utilise a variable speed compressor to regulate the pool water temperature automatically and independently.
  • Cost-effectiveness: Pool heat pumps can save you money on your energy bills, especially if you live in a mild climate.
  • Extended swimming season: Pool heat pumps can extend your swimming season by warming the pool water in the cooler months.
  • Environmental friendliness: Pool heat pumps are an environmentally friendly way to heat your swimming pool. They do not produce any emissions and they use less energy than other types of pool heaters.
  • Automatic Evaporator DE-ICING: Electroheat ECO-V inverter pool heat pumps feature automatic de-icing for situations where frost or ice may develop on the evaporator as part of normal operation. Common in cooler climates or winter months.
  • Inverter technology improves energy efficiency.
  • Side venting design allows for greater installation options.
  • Digital controller with diagnostics.
  • Heating and cooling operating modes to select from.
  • Hydrophilic blue fin coated evaporator: protects unit from erosion in humid and coastal environments
  • Automatic hot gas evaporator de-icing removes ice build up
  • R32 refrigerant for zero ozone depletion.

Get a Quote Today

Connect with us and lets discuss your pool heating options?
=

EXCEPTIONAL PERFORMANCE & LOW OPERATING COSTS

Evo Advanced DHP-R series delivers pool heating with exceptional performance, low operating costs & a C.O.P. as high as 5.4.

Combine your Evo pool heat pump with a pool blanket &/or your solar PV for the ultimate energy
efficient pool heating!

CUTTING EDGE FULL COLOUR TOUCHSCREEN CONTROLLER

Featuring an easy to use,
intelligent full colour touch screen controller that allows you to maintain your pool temperature to within 0.1 degree while delivering optimum performance.

WI-FI Control

Control your Evo Advanced DHP-R heat pump anytime, anywhere with the smart
Wi-Fi controller app. Available for iOS and Android, the smart phone controller app offers you an
easy and convenient way to monitor and control your pool temperature.

HEATING & COOLING MODES

The Advanced DHP-R series is equipped to automatically heat or cool your pool water based on your set temperature - so you can be sure your pool is always at your desired temperature!

VERY QUIET OPERATION + DUAL SPEED FANS

Our low noise fan blades ensures minimal operating noise which is ideal for you and your neighbours! Plus, the dual speed fan allows you to run your heat pump during the night with even further reduced noise levels. The fan is able to operate on a lower RPM on a timer or ambient temperature basis. * Dual speed fans available on selected models - refer to website for most up to date models.

LOW AMBIENT AIR PERFORMANCE

The Evo Advanced DHP-R heat pump offers low running times because of its higher heat outputs when it counts.

304 STAINLESS STEEL CABINET

The 304 stainless steel cabinet will ensure long term corrosion
resistance.

DUAL DEFROST TECHNOLOGY

Our Thermotec Element Defrost technology and auto defrost system ensures your heat pump is defrosting less and heating more often, maximizing the
heating capacity in colder weather when its needed the most.

TITANIUM HEAT EXCHANGER

The titanium thread heat exchanger ensures maximum heat transfer with the ultimate corrosion resistance, improving the heat transfer efficiency by up to 30% compared to standard heat exchangers.

ELECTRONIC EXPANSION VALVE 2 TECHNOLOGY

Electronic Expansion Valve 2 Technology is the absolute latest and the best possible refrigeration control system available in the market today. This results in higher C.O.P. and improved efficiency of up to 20% compared to other
commercial heater brands.

LATEST CORROSION PROTECTION TECHNOLOGY

The bluetec hydrophilic coating on the condenser fins is the latest technology in corrosion protection allowing your heat pump to
maintain its high efficiency for many years to come.

Inexpensive to run

A fraction of the running cost of Gas pool heating

Swim in a heated pool all year

Unlike solar
heating which only effectively extends the
swimming season by a few months, an Aquatight
Heat Pump heats continuously even when it’s cool
and cloudy

Incredibly efficient

Japanese inverter technology
- massive 6.2 COP (Coefficient of Performance)
- 15-30% higher efficiency than competitive units

Top quality, maximum durability Titanium Heat
Exchanger

Installation is quick and easy

You could be
swimming in a warm pool in no time

Attractive, unobtrusive heating unit

Model Specifications:

IM13 – 13kW

  • Advised Pool volume (L): 30,000 – 55,000*
  • Power Supply: 230V / Single phase / 50Hz
  • Heating Capacity / COP at 50% Capacity:-
    • At 26°C air Temp / Water Temp to 26°C / 80% Humidity
      • 8 kW
      • COP (50%) 11
    • At 15°C air Temp / Water Temp to 26°C / 70% Humidity
      • 9kW
      • COP (50%) 6.8
    • Rated Input Current at 15°C Air (A): 0.96 – 7.52
    • Max Input Current (A): 12
    • Sound pressure at 1m dB(A): 42.1 – 50.7
    • Dimensions (mm) L x W x H: 961 x 340 x 658
    • Weight: 50kg


IM15 – 15kW

  • Advised Pool volume (L): 35,000 – 65,000*
  • Power Supply: 230V / Single phase / 50Hz
  • Heating Capacity / COP at 50% Capacity:-
    • At 26°C air Temp / Water Temp to 26°C / 80% Humidity
      • 15 kW
      • COP (50%) 10.9
    • At 15°C air Temp / Water Temp to 26°C / 70% Humidity
      • 5kW
      • COP (50%) 6.6
    • Rated Input Current at 15°C Air (A): 1.17 – 9.6
    • Max Input Current (A): 13.5
    • Sound pressure at 1m dB(A): 41.3 – 54
    • Dimensions (mm) L x W x H: 961 x 340 x 658
    • Weight: 52kg

Saturn Heat Pump Specifications:
• Power Supply: 230V / Single phase / 50Hz
• Water pipe in-out size (mm): 48.3
• Dimensions (mm) L x W x H: 872 x 349 x 654
• R410a Refrigerant

Model Specifications:
iXB09:
Advised Pool volume (L): 20,000 to 35,000*
Heating Capacity / COP:-
At 26°C air Temp / Water Temp to 26°C / 80% Humidity
- 8.0kW
- COP 10.4 – 5.6

At 15°C air Temp / Water Temp to 26°C / 70% Humidity
- 6.0kW
- COP 6.1 – 4.1
Rated Input Current at 15°C Air: 1.48 – 6.0
Sound pressure at 1m dB(A): 40.8 – 51.1
Weight: 46kg


iX09:

Advised Pool volume (L): 20,000 to 40,000*

Heating Capacity / COP:-
At 26°C air Temp / Water Temp to 26°C / 80% Humidity
- 9.2kW
- COP 11 – 5.7

At 15°C air Temp / Water Temp to 26°C / 70% Humidity
- 7.0kW
- COP 6.2 – 4.3
Rated Input Current at 15°C Air: 1.48 – 7.0
Sound pressure at 1m dB(A): 40.6 – 52.5
Weight: 47kg

iX12:
Advised Pool Volume (L): 30,000 to 55,000*
Heating Capacity / COP:-
At 26°C air Temp / Water Temp to 26°C / 80% Humidity
- 12.5kW
- COP 12.1 – 5.9

At 15°C air Temp / Water Temp to 26°C / 70% Humidity
- 9.0kW
- COP 6.1 – 4.2
Rated Input Current at 15°C Air: 1.57 – 8.7
Sound pressure at 1m dB(A): 42.9 – 53
Weight: 49kg

Specifications correct at the time of publishing and are subject to change without notice.

*The Advised Pool Volume indicated is a guide only and applies under following conditions: Swimming pool is well covered; system runs at least 15 hours per day;
If these conditions are not met, please kindly ask your nearest Southside Pool store for advice.

EXCEPTIONAL PERFORMANCE & LOW OPERATING COSTS

Evo Fusion-i series
delivers pool heating with exceptional performance, low operating costs & a C.O.P. as high as 12.57 .

Combine your Evo Fusion-i pool heat pump with a pool blanket &/or your
solar PV for the ultimate energy efficient pool heating!

LATEST STEPLESS DC FULL INVERTER TECHNOLOGY 

Incorporating the latest full
inverter technology - including DC stepless compressors, fans, and PC boards; the Fusion-i
range will automatically adjust it’s power and electricity consumption based on the exact
requirements of your pool. This ensures your pool reaches the desired temperature
faster, and is maintained more efficiently - SAVING YOU ON YOUR HOUSEHOLD ENERGY BILL.

TOUCHSCREEN CONTROLLER

Designed with an intelligent LCD touch screen controller, you can easily increase or decrease water temperatures and switch between heating and cooling modes.

HEATING & COOLING MODES

The Fusion-i series is equipped to automatically heat or cool your pool water based on your set temperature - so you can be sure your pool is
always at your desired temperature!

VERY QUIET OPERATION

Our low noise fan blades ensures minimal operating noise which is ideal for you and your neighbours!

AUTOMATIC DEFROST

Designed with a four-way valve reverse defrost method, the Fusion-i series provides automatic defrosting and allows the heat pump to work
efficiently in ambient air temperatures as low as -7°C.

TITANIUM HEAT EXCHANGER 

The titanium thread heat exchanger ensures maximum heat transfer with the ultimate corrosion resistance, improving the heat transfer efficiency by up to 30% compared to standard heat exchangers.

ELECTRONIC EXPANSION VALVE 2 TECHNOLOGY

Electronic Expansion Valve 2 Technology is the absolute latest and the best possible refrigeration control system available in the market today. This results in higher C.O.P. and improved efficiency of up
to 20% compared to other commercial heater brands.

LATEST CORROSION PROTECTION TECHNOLOGY

The bluetec hydrophilic coating on the condenser fins is the latest technology in corrosion protection allowing your heat pump to maintain its high efficiency for many years to come.